How to Use

• Step 1: Determine the area to be treated and measure the length and width (in feet) of the area to be sprayed then multiply the two values to get square footage (length x width = square footage). 1 quart of Cyonara Lawn & Garden can treat 8,000 to 16,000 sq. ft.
• Step 2: Shake the bottle well before use then connect the RTU (ready-to-use) container to the end of a garden hose. Be sure that the nozzle is in the “off” position.
• Step 3: Turn on the water at the spigot and then bend the safety tab back on the bottle to begin spraying. It is recommended to start from the furthest section of the lawn and work backward towards the water faucet to prevent from walking over treated areas.
• Step 4: Make sweeping motions with the bottle and spray areas evenly until wet.
• Step 5: To stop the sprayer, turn the dial counter-clockwise until the shuts off and the safety tab is moved into the OFF position on the valve. You can then turn off the water at the faucet.

Where to Use

Cyonara Lawn & Garden RTU can be sprayed outdoors on lawns, bushes, plants, gardens, trees, vegetables and flowers located around residential areas.

When to Use

Cyonara Lawn & Garden RTU can be used when insects area seen and reapply as needed. Cyonara Lawn & Garden RTU should be applied during calm weather when rain is not in the forecast for at least 24 hours.

Safety Information

Cyonara Lawn & Garden RTU is safe to use around children and pets when applied according to the product label. Make sure treated areas are dry before allowing children and pets to enter. Always were the proper personal protective equipment (PPE) when using Cyonara Lawn & Garden RTU.

Special Considerations

For maximum results, read the product label before applying Cyonara Lawn & Garden RTU. The specific instructions for applying depend on the pests being controlled and where applications will be made.