Calcium (Ca) (Min.)14.00%

Calcium (Ca) (Max.)16.80%

Phosphorus (P) (Min.)6.00%

Salt (NaCl) (Min.)19.50%

Salt (NaCl) (Max.)23.40%

Magnesium (Mg) (Min.)1.50%

Potassium (K) (Min.)1.00%

Copper (Cu) (Min.)1,450 ppm

Copper (Cu) (Max.)1,850 ppm

Selenium (Se) (Min.)21 ppm

Zinc (Zn) (Min.)7,000 ppm

Manganese (Mn) (Min.)7,000 ppm

Vitamin A (Min.)300,000 IU/lb

Vitamin D3 (Min.)50,000 IU/lb

Vitamin E (Min.)500 IU/lb

Provide one block for every 10-20 head of animals. If more than one block is required, place at least 10 feet apart to allow ample spacing for consumption. Consumption should be approximately 0.5 to 1 ounce per head daily. If consumption is too high, move block(s) farther away from water source and high traffic areas. If consumption is too low do the opposite. When first introducing the block consumption levels can vary considerably. Do not feed to starving animals. Consider offering some free choice salt beside the block if initial consumption is too high. This can slow down consumption long enough for the animals to
balance out intake. Always ensure there is plenty of forage available as this product has been formulated to serve as a supplement only, not a source of complete feed. Always offer plenty of fresh clean water.

CAUTION: Use as directed. Selenium intake should not
exceed 0.7 mg per head daily.

WARNING: Contains added copper. Do not feed to
sheep